Geyser Replacement Milnerton | Old Geyser Removed, New One Installed

About Geyser Replacement in Milnerton

When your geyser has reached the end of its life - whether from internal tank corrosion, repeated failures, or simply old age - a complete replacement is the only permanent solution. Geyser replacement involves safely removing the old unit, properly disposing of it, and installing a brand-new geyser with all current safety components and compliance documentation.

Abacas Solution makes geyser replacement as smooth and fast as possible. In most cases, we complete the full process in a single day: arrive in the morning, drain and remove the old geyser, install the new unit in the same position (or a new location if you prefer), connect all plumbing and electrical, test everything, and hand over your compliance certificates before we leave. You typically have hot water again within 2-3 hours of the new geyser being connected.

Replacement is also an opportunity to upgrade. If your old geyser was undersized for your household, now is the time to move up to a larger unit. If your geyser was in the ceiling where leaks caused damage, consider an external wall-mounted installation. If energy costs concern you, this is the ideal moment to switch to a solar geyser or heat pump system. We discuss all options and help you make the choice that best fits your household, budget, and long-term goals.

This is one of several specialist services we offer under geysers & water heaters in Milnerton. As part of our Milnerton plumbing team, we bring over 25 years of hands-on experience to every job.

Geyser Replacement in Milnerton - Abacas Solution

When to Call for Geyser Replacement

Call when your geyser is leaking from the tank itself (rust-coloured water dripping from the body), when the geyser is over 10-12 years old and experiencing repeated faults, when your insurance company requires geyser replacement after a claim, when you want to upgrade to a larger or more efficient geyser, or when selling your property and the geyser needs replacement for compliance.

Our Geyser Replacement Process

1

Assessment & Recommendation

We inspect the failed geyser, assess the installation location, and recommend a replacement unit based on your household size and hot water needs. If you want to upgrade size or switch technology (solar, heat pump), we advise on options and costs.

2

Remove Old Geyser

We switch off power, drain the old geyser completely, disconnect plumbing and electrical, and carefully remove the unit from the ceiling or wall mount. We dispose of the old geyser responsibly - no dumping.

3

Install New Geyser

The new geyser is mounted, fitted with a new drip tray, T&P valve, vacuum breaker, and isolation valve. All plumbing connections are made with new fittings, hot water pipes are insulated, and the electrical supply is connected.

4

Commission & Certify

We fill the new geyser, bleed air from the system, check every connection for leaks, set the thermostat to 60 degrees Celsius, test the T&P valve, and issue your plumbing compliance certificate. Hot water is typically available within 1-2 hours of filling.

Many homeowners in Milnerton who need geyser replacement also require geyser installation in Milnerton and geyser repair. We handle everything, so you only need one call.

Safety & Compliance

A full 150L geyser weighs approximately 180kg. Removal from ceiling spaces requires proper equipment and technique to avoid injury or damage to the ceiling structure. We drain the geyser completely before removal and use appropriate lifting methods. The electrical supply must be isolated at the DB board before disconnection. Old geysers must be disposed of at approved waste facilities, not dumped illegally.

Geyser Replacement Cost in Milnerton

Geyser replacement costs include the new unit, all safety components, removal and disposal of the old unit, installation, and compliance certification. A 100L replacement costs R4,500-R7,500. A 150L replacement costs R5,500-R10,000. A 200L replacement costs R7,500-R13,000. Premium or stainless-steel tank geysers cost more. If the drip tray, mounting brackets, or electrical circuit need upgrading to meet current standards, additional costs of R500-R2,000 may apply.

Frequently Asked Questions

How much does geyser replacement cost in Milnerton?

Full geyser replacement in Milnerton costs R4,500-R7,500 for a 100L, R5,500-R10,000 for a 150L, and R7,500-R13,000 for a 200L unit. This includes the new geyser, all safety components, removal and disposal of the old unit, installation, and compliance certificate. We quote a fixed price before starting work.

How long does a geyser replacement take?

A standard like-for-like geyser replacement takes 4-6 hours from arrival to hot water. This includes draining and removing the old unit, installing the new one, connecting all plumbing and electrical, testing, and issuing certificates. We aim to complete all residential replacements in a single day.

Can I upgrade to a bigger geyser during replacement?

Yes, and it is the ideal time to do so. However, a larger geyser is heavier when full, so we need to verify that the mounting structure can support the additional weight. A 200L geyser weighs approximately 230kg when full. If structural reinforcement is needed, we arrange it. The plumbing connections may also need upsizing for the larger unit.

Do you remove and dispose of the old geyser?

Yes, removal and responsible disposal of the old geyser is included in our replacement service. We drain the unit, remove it safely, and ensure it is disposed of at an approved waste facility. You do not need to arrange anything separately.